• The AM-CERT Cell utilizes a FANUC M10 or M20 robot with communication to a PLC, multiple End of Arm Tooling options, custom folding fencing, and safety training features built into a single system that is portable using a pallet jack or forklift. 

• To accommodate the limited space in education environments, this cell is designed to expand to a 10’ x 10’ work cell giving adequate area for conveyors, palletizing, or pick and place, and when you are done just fold up the guarding to have a cell that is now only 54” wide by 72” deep.

• The  AM-CERT is a full-featured large robot cell using the full-sized FANUC R30iB robot controller platform, fully integrated to Rockwell Automation Compact Logix PLC using Studio 5000 based programming and a Rockwell Panel View Plus 10” interface touch screen.

• This cell can teach PLC programming and advanced robot material handling in one self-contained, transportable cell. Advanced safety can be explained by use of safety interlock switches and light curtain or area scanner fully integrated into the robot and P LC safety circuit.

• The cell is ready for the optional conveyor to supply parts to the robot or away from the robot to outside the safety fencing.

• Structural steel robot base that supports the robot, robot controller, PLC cabinet, and perimeter fencing
• Provisions for FANUC M10ia or M20ia 6 axis robot with arm mounted iRVision 2D
• Folding perimeter fencing with 2″ wire mesh Stronguard panels that store on the robot base frame
• Safety interlocked entry door on perimeter fencing
• System stack light
• Lower side access panel for optional Swivellink conveyor though the perimeter fencing (not safety interlocked)
• Slide out programming laptop desk with 110 VAC power supply.
• Fold down pick and place tables, one on each side of the robot
• SMC pneumatics, filter/regulator with lock out-tag out safety valve
• SMC robot mounted valve bank wired to robot I/O through the EE Connector
• SMC two jaw robot gripper with open/close sensors and Piab vacuum with vacuum switch.
• Available ATI automatic tool change with separate gripper and vacuum tool.
• Two 8 port configurable I/O points.
• PLC control panel with viewing window, main power disconnect, program access port on outside of panel.
• Rockwell CompactLogix or GuardLogix PLC cell control.
• Rockwell PanelView 10″ touch screen interface with cell function screens.
• Light curtain or area scan safety for robot work area
• Main power choice of 208 VAC 3 phase, 220 VAC 3 phase, or 480 VAC 3 phase

Training Areas: PLC, Robot, Vision, Safety, Pneumetics, Conveyor

Levels: I, II, III, & Mechatronics